Swift’s Freedom boats (1x and 2x/-) are built using FISA’s
design for adaptive boats. They are available in 2 grades of construction,
either Club A or Club B, both of which are sandwich construction, so providing
stiffness and durability, which is especially important in these flat bottomed
boats, while keeping the weight manageable.
These boats have many uses, not only as adaptive. They are useful for introducing beginners to rowing, as recreational boats, for touring, and as an alternative to always training in a fine racing shell, especially in rougher conditions, or for heavier loading and less concern with balance (floating ergometer!)
They are stable due to their flat bottoms, they track well due to their length, and also have a good turn of speed. The single was even used in 2007 in the Czech junior championships by a novice rower, and helped her get a 3rd place finish!
These boats have many uses, not only as adaptive. They are useful for introducing beginners to rowing, as recreational boats, for touring, and as an alternative to always training in a fine racing shell, especially in rougher conditions, or for heavier loading and less concern with balance (floating ergometer!)
They are stable due to their flat bottoms, they track well due to their length, and also have a good turn of speed. The single was even used in 2007 in the Czech junior championships by a novice rower, and helped her get a 3rd place finish!
Common Features of all Freedom boats
Only wing riggers are available. Aluminium is standard, and it is possible to upgrade to carbon. Backstays will only be supplied with sweep riggers.
There are 6 sets of holes to attach the wing rigger to the boat.
The holes in the seat deck for attaching rails will be the same
for adaptive and recreational, so it is easy to change the rails.
The holes in the seat deck for attaching rails will be the same
for adaptive and recreational, so it is easy to change the rails.
| Sizes and weights of the boats | ||||
|---|---|---|---|---|
| Length mm | Width mm | Depth mm |
Crew weight range kg (approx) | |
| 1x | 6360 | 510 | 265 | 65-105 |
| 2x | 9160 | 515 | 275 | 60-100 |
Features of Freedom Recreational boats
The recreational version of the freedom 1x and 2x comes with normal seat rails and single action carbon seats.
Floats are not supplied as standard, and need to be ordered seperately.
The riggers should be attached using the 2nd set of holes
closest to the stern, with the holes either side of this set
available for adjusting the trim.
Floats are not supplied as standard, and need to be ordered seperately.
The riggers should be attached using the 2nd set of holes
closest to the stern, with the holes either side of this set
available for adjusting the trim.
| Weights of the recreational version | |||
|---|---|---|---|
| Club A | Club B | Variation | |
| 1x | 18 | 20 | ±1kg |
| 2x | 33 | 36 | ±2kg |
| 2- | 31 | 34 | ±2kg |
FeFreedomatures of Adaptive boats
The adaptive version of the freedom 1x and 2x comes with adaptive seat rails and adaptive seats.
Please note that no straps are supplied as standard, and must be ordered separately.
The 1x comes with pontoons as standard. The 2x does not come with pontoons as standard, so if needed, they need to be ordered seperately.
Please note that no straps are supplied as standard, and must be ordered separately.
The 1x comes with pontoons as standard. The 2x does not come with pontoons as standard, so if needed, they need to be ordered seperately.
From FISA’s “2007 FISA ADAPTIVE
ROWING REGULATIONS”
PART IV – BOATS AND CONSTRUCTION
Regulation, Rule 31 – Boats and Equipment
3. Standard Adaptive 2x: The FISA Standard Adaptive 2x has a fixed seat and may have stabilizing pontoons.
4. Standard Adaptive 1x: The FISA Standard Adaptive 1x has a fixed seat and must have stabilizing pontoons.
PART IV – BOATS AND CONSTRUCTION
Regulation, Rule 31 – Boats and Equipment
3. Standard Adaptive 2x: The FISA Standard Adaptive 2x has a fixed seat and may have stabilizing pontoons.
4. Standard Adaptive 1x: The FISA Standard Adaptive 1x has a fixed seat and must have stabilizing pontoons.
The position of the seat is adjustable fore and aft, and the back of the seat is adjustable for
height and angle.
The 6 sets of holes to attach the wing rigger to the boat are there to allow the line of work (pin position) to be closer to the bow, which for rowers with arms only (1x) and arms and trunk only (2x), means they will be able to get a much better catch angle with the oar, and should lead to faster boat speed.
We are keen to make our boats the 1st choice for adaptive rowers who want boat speed, as well as being the best value and most robust.
If you have any suggestions about how else we can do this, please let us know. One other area that has potential, is to reduce the span and oar length, so that a longer (and more efficient) rowing arc can be achieved.
The 6 sets of holes to attach the wing rigger to the boat are there to allow the line of work (pin position) to be closer to the bow, which for rowers with arms only (1x) and arms and trunk only (2x), means they will be able to get a much better catch angle with the oar, and should lead to faster boat speed.
We are keen to make our boats the 1st choice for adaptive rowers who want boat speed, as well as being the best value and most robust.
If you have any suggestions about how else we can do this, please let us know. One other area that has potential, is to reduce the span and oar length, so that a longer (and more efficient) rowing arc can be achieved.
| Weights of the adaptive version | |||
|---|---|---|---|
| Club A | Club B | Variation | |
| 1x | 23.5 | 25.5 | ±1kg |
| 2x | 37.5 | 40.5 | ±2kg |
FISA’s Regulation, Rule 32: Boat Weights
In addition to the requirements of Rule 32, the minimum weights for Adaptive boats shall include pontoons where used. The minimum weights of Adaptive boats are: 1x 22kg, 2x 36kg
In addition to the requirements of Rule 32, the minimum weights for Adaptive boats shall include pontoons where used. The minimum weights of Adaptive boats are: 1x 22kg, 2x 36kg
Joint adaptive and recreational boats
These boats will be
the adaptive boats with additional ordinary seat rails and single
action carbon seats.
The holes in the seat deck for attaching rails will be the same for adaptive and recreational, so it is easy to change the rails.
The holes in the seat deck for attaching rails will be the same for adaptive and recreational, so it is easy to change the rails.
Pricing
 |
 |
Please note that Freedom 1x and 2x are now only available with wing riggers.