RIGGERS AND ASSOCIATED PARTS
(updated 01 Nov 2011)
All prices are for units of 1 piece, except where mentioned.
(updated 01 Nov 2011)
All prices are for units of 1 piece, except where mentioned.
| Al. | aluminium anodized | Carb | carbon | dis | discontinued |
|---|---|---|---|---|---|
| FG | Fiber grass | Ny | nylon | NYA | Not Yet Available |
| Plas | plastic | Rub | rubber | S/S | stainless steel |
| W | wood | 05/07~ | from May 2007 | ~06/07 | until June 2007 |
Pins
Pins are all 13mm shafts, with 8x27mm tops, and supplied with washers, nuts and spacers.
| Prod. # | Product description | Material | Standard? | Price (excl. tax) |
|---|---|---|---|---|
| Rig1A-sc | 13x105mm shaft, 10x55mm base - for scull & sweep Carbon wing | S/S | yes | 12.00 |
| Rig1B-sc | 13x105mm shaft, 10x30mm base - for L block | S/S | yes | 12.00 |
| Rig1C-sc | 13x105mm shaft, 12x55mm base - for Euro, Gull, scull & sweep Al. wing | S/S | yes | 12.00 |
| Rig1D-sc | 13x105mm shaft, 12x30mm base | S/S | no | 12.00 |
| Rig1A-sw | 13x120mm shaft, 10x55mm base | S/S | no | 12.00 |
| Rig1B-sw | 13x120mm shaft, 10x30mm base - for L block | S/S | yes | 12.00 |
| Rig1C-sw | 13x120mm shaft, 12x55mm base - for Euro, Gull wing | S/S | yes | 12.00 |
| Rig1D-sw | 13x120mm shaft, 12x30mm base | S/S | yes | 12.00 |
| Rig3A | 13x100mm shaft - for carbon tube and ali back rigger | S/S | yes | 9.50 |
Pin wedges (Rig10) are to change the angle (pitch) of the pin. Either fore/aft,
lateral, or both. 2 pieces must be used, one above and one below the rigger block, inserted in opposing directions.
Rigger height wedges (Rig11)are inserted between the saxboards and the foor of the rigger, and will increase or decrease the work height. Pin angle will also change, but pin wedges can be used to correct this.
Rigger height wedges (Rig11)are inserted between the saxboards and the foor of the rigger, and will increase or decrease the work height. Pin angle will also change, but pin wedges can be used to correct this.
| Prod. # | Product description | Material | Standard? | Price (excl. tax) |
|---|---|---|---|---|
| Rig4 | Complete C bracket for carbon tube rigger | S/S | ~12/07 | |
| Rig4A | C bracket (only) for carbon tube rigger | S/S | ~12/07 | |
| Rig4B | Bolts to fix C bracket to carbon tube rigger (1 set) | S/S | ~12/07 | |
| Rig8A | “ O ” shape spacer for pin 2mm (pack of 100 pieces) | Pla | yes | 2.50 |
| Rig9 | C bracket for Al. back rigger, including back plate and 2 bolts | Al. | yes | 8.50 |
| Rig10 | Pin wedges, 2 each of 0.5, 1.0, 1.5, 2.0, 2.5 degrees | Pla | no | 2.20 |
| Rig11 | Rigger height wedges, 1 each of 0.5, 1.0, 1.5, 2.0, 2.5 degrees | Pla | no | 2.50 |
Aluminium Riggers
See the "Rigger" page of the website for details of riggers.
| Prod. # | Product description | Material | Standard? | Price (excl. tax) |
|---|---|---|---|---|
| Rig20A | 3 stay scull rigger frame, with European style 12mm block | Al. | yes | 68.00 |
| Rig21A | 3 stay sweep rigger frame, with European style 12mm block | Al. | yes | 77.00 |
| Rig20C | 3 stay scull rigger frame, for L style block | Al. | yes | 68.00 |
| Rig21C | 3 stay sweep rigger frame, for L style block | Al. | yes | 77.00 |
| Rig22A | Non-adjustable L block for pins 1B-sc and 1B-sw | Al. | yes | 8.50 |
| Rig22B | Adjustable L block for 10mm pins (from RCUK at GBP10.00 each) | Al. | no | 10.50 |
| Rig23 | 2 stay scull back rigger frame | Al. | yes | 85.00 |
| Rig24 | 2 stay sweep back rigger frame | Al. | yes | 94.00 |
| Rig29 | Scullwing rigger | Al. | yes | 136.00 |
| Rig30 | Sweep wing rigger | Al. | yes | 94.00 |
| Rig31 | 2 stay scull gull rigger frame | Al. | yes | 77.00 |
| Rig32 | 2 stay sweep gull rigger frame | Al. | yes | 85.00 |
Carbon Riggers
See the "Rigger" page of the website for details of riggers.
| Prod. # | Product description | Material | Standard? | Price (excl. tax) |
|---|---|---|---|---|
| Rig25 | 2 stay scull carbon tube rigger with C bracket (back rigger only) | ~12/07 | yes | |
| Rig26 | 2 stay sweep carbon tube rigger with C bracket (back rigger only) | ~12/07 | yes | |
| Rig27 | Scull carbon wing rigger with European stye 10mm block | Carb | yes | 290.00 |
| Rig28 | Sweep carbon wing rigger with European stye 10mm block | Carb | yes | 220.00 |
Topstays
Topstays
are made from 2 parts, the long pipe and (shorter) extender. The
long pipe has bow and stroke side, but is the same for ALL boats
(incl. 1x, 4x+, 4+, 8+ etc), but needs to be cut to the right length
by the customer. There is a different extender for each boat class,
but bowside and strokeside are the same.
| Prod. # | Product description | Material | Standard? | Price (excl. tax) |
|---|---|---|---|---|
| Rig40b | Long pipe for backstay with 8.5mm hole - bowside | Al. | yes | 8.50 |
| Rig40s | Long pipe for backstay with 8.5mm hole - strokeside | Al. | yes | 8.50 |
| Rig41-1x | Extender for backstay for 1xcomplete | Al. | yes | 10.00 |
| Rig41-xx | Extender for backstay for 2xcomplete | Al. | yes | 10.00 |
| Rig41-4x | Extender for backstay for 4xcomplete | Al. | yes | 10.00 |
| Rig41-2- | Extender for backstay for 2-complete | Al. | yes | 10.00 |
| Rig41-4+/- | Extender for backstay for 4+/-complete | Al. | yes | 10.00 |
| Rig41-8+ | Extender for backstay for 8+complete | Al. | yes | 10.00 |
| Rig41-w | Extender for backstay for wing rigger boats complete | Al. | yes | 10.00 |
Rigger bolts
(Rig50) have square "necks" which fit the square
hole in the rigger bolt washers. Because the inside and outside
surfaces of ribs (shoulders) are not parallel, the head of the
bolt needs to be bent, relative to the shaft.
Rigger bolt washers (Rig51) are sold flat. They should be fitted to the rib/shoulder with a rigger bolt that is tightened. Then tap the "ears" of the washer around the rib/shoulder with a hammer.
Rigger bolt washers (Rig51) are sold flat. They should be fitted to the rib/shoulder with a rigger bolt that is tightened. Then tap the "ears" of the washer around the rib/shoulder with a hammer.
| Prod. # | Product description | Material | Standard? | Price (excl. tax) |
|---|---|---|---|---|
| Rig45A | Rigger plates for saxboards, 2x60x60mm, un-drilled small | Carb | yes | 1.30 |
| Rig45B | Rigger plates for saxboards, 2x70x100mm, un-drilled big | Carb | yes | 1.70 |
| Rig50-35 | 6x35 rigger bolts | S/S | no | 0.80 |
| Rig50-40 | 6x40 rigger bolts | S/S | no | 0.80 |
| Rig50-45 | 6x45 rigger bolts | S/S | no | 0.80 |
| Rig50-50 | 6x50 rigger bolts | S/S | no | 0.80 |
| Rig50-60 | 6x60 rigger bolts | S/S | no | 0.80 |
| Rig50-80 | 6x80 rigger bolts | S/S | no | 1.30 |
| Rig50-35pb | 6x35 rigger bolts - pre bent bolt head | S/S | yes | 0.80 |
| Rig50-40pb | 6x40 rigger bolts - pre bent bolt head | S/S | yes | 0.80 |
| Rig50-45pb | 6x45 rigger bolts - pre bent bolt head | S/S | yes | 0.80 |
| Rig50-50pb | 6x50 rigger bolts - pre bent bolt head | S/S | yes | 0.80 |
| Rig50-60pb | 6x60 rigger bolts - pre bent bolt head | S/S | yes | 0.80 |
| Rig50-80pb | 6x80 rigger bolts - pre bent bolt head | S/S | yes | 1.30 |
| Rig51 | Rigger bolt washer (square hole) - not bent | S/S | yes | 0.80 |
MARTINOLI
| Prod. # | Product description | Material | Standard | Price (excl. tax) |
|---|---|---|---|---|
| M5B | Nylon washer for oarlock height adjustment | Ny | No | 0.80 |
| M5E | Nylon C washer for height regulation | Ny | No | 2.00 |
| M55 | Nylon sweep oarlock including blue bushes | Ny | No | 7.00 |
| M55A | Bushes for sweep oarlocks (blue) | Ny | No | 2.00 |
| M56 | Nylon scull oarlock including blue bushes | Ny | No | 7.00 |
| M56A | Bushes for scull oarlocks (blue) | Ny | No | 2.00 |