examples of racks combinations
NYA = Not Yet Available n/a= Not Available
Here are some examples of racks combinations
NYA = Not Yet Available n/a= Not Available
Here are some examples of racks combinations
| VERTICAL OAR RACKS (galvanized steel) | Case 1 | Case 2 | Case 3 | |
|---|---|---|---|---|
| Vor-up | upright for A frame | 2 | 2 | 2 |
| Vor-dia | diagonal for A frame + "bolt 3" | 2 | 2 | 4 |
| Vor-con | connector for A frame+ "bolt 1" | 2 | 2 | 4 |
| Vor-mxstay140 | main cross stay (1,400mm)+ "bolt 1" | NYA | NYA | NYA |
| Vor-mxstay200 | main cross stay (2,000mm)+ "bolt 1" | 1 | 1 | 1 |
| Vor-xstay140 | 1400mm cross stay for vertical and horizontal oar racks+ "bolt 1" | |||
| Vor-xstay200 | 2000mm cross stay for vertical and horizontal oar racks+ "bolt 1" | 2 | 2 | 3 |
| Vor-arm1 | 700mm arm with extruded rubber top+ "bolt 1" | 15 | 12 | 30 |
| Vor-bplate | back plate for arm | 15 | 12 | |
| Vor-shim | 2mm shim for adjusting the "lie" of the base, when not used with wheels | NYA | NYA | NYA |
| Case 1 | Single side, 15 arms (56 pairs of sculls or 66 sweep oars {4 oars x 11 spaces}) | |||
| Case 2 | Single side, 12 arms (66 sweep oars or 44 pairs of sculls) | |||
| Case 3 | Double side, 30 arms (112 pairs of sculls or 132 sweep oars) | |||
| HORIZONTAL OAR RACKS (galvanized steel) | Case 1 | Case 2 | |
|---|---|---|---|
| Hor-arm-s | single sided arm, 800mm without rubber top+ "bolt 4" | 14 | |
| Hor-arm-d | double sided arm, 1,800mm without rubber top+ "bolt 4" | 18 | |
| Hor-up200 | 2000mm tall upright+ "bolt 1" | 2 | |
| Hor-up250 | 2500mm tall upright+ "bolt 1" | 2 | |
| Hor-xstay140a | 1400mm cross stay for "Vor" and "Hor"(for base, 2 pieces needed)+ "bolt 2" | 2 | 2 |
| Hor-xstay140b | 1400mm cross stay & spacer for "Vor" and "Hor"(for upright, 1 piece needed)+ "bolt 4" | 1 | 1 |
| Hor-xstay200a | 2000mm cross stay for "Vor" and "Hor"(for base, 2 pieces needed)+ "bolt 2" | ||
| Hor-xstay200b | 2000mm cross stay & spacer for "Vor" and "Hor"(for base, 2 pieces needed)+ "bolt 4" | ||
| Hor-spacer | spacer for top cross stay (150 x 50 x 50mm) | ||
| Hor-base-s | 1100mm base for single side | 2 | |
| Hor-base-d | 1400mm base for double side | 2 | |
| Hor-wheel1 | 200mm diameter heavy duty "free" wheel (2 needed for each base)+ "bolt 5" | 4 | |
| Hor-wheel2 | 200mm diameter heavy duty "fixed" wheel (2 needed for each base)+ "bolt 5" | ||
| Hor-shim | 2mm shim for adjusting the "lie" of the base, when not used with wheels | NYA | NYA |
| Hor-rub1 | 700mm length of extruded rubber to fit "Hor arm-s" | 28 | |
| Hor-rub2 | 800mm length of extruded rubber to fit "Hor arm-d" (2 needed for each arm) | ||
| Hor-glue | glue to fix rubber to arms (be be sourced locally, not by Swift) | n/a | n/a |
| Case 1 | Single side, 2m tall, 7 pairs of arms, with rubber tops, with wheels, | ||
| Case 2 | Double side, 2.5m tall, 9 pairs of arms, without rubber tops, without wheels, | ||
| VERTICAL OAR RACKS (galvanized steel) | Case 1 | Case 2 | Case 3 | |
|---|---|---|---|---|
| Vor-up | upright for A frame | 2 | 2 | 2 |
| Vor-dia | diagonal for A frame + "bolt 3" | 2 | 2 | 4 |
| Vor-con | connector for A frame+ "bolt 1" | 2 | 2 | 4 |
| Vor-mxstay140 | main cross stay (1,400mm)+ "bolt 1" | NYA | NYA | NYA |
| Vor-mxstay200 | main cross stay (2,000mm)+ "bolt 1" | 1 | 1 | 1 |
| Vor-xstay140 | 1400mm cross stay for vertical and horizontal oar racks+ "bolt 1" | |||
| Vor-xstay200 | 2000mm cross stay for vertical and horizontal oar racks+ "bolt 1" | 2 | 2 | 3 |
| Vor-arm1 | 700mm arm with extruded rubber top+ "bolt 1" | 15 | 12 | 30 |
| Vor-bplate | back plate for arm | 15 | 12 | |
| Vor-shim | 2mm shim for adjusting the "lie" of the base, when not used with wheels | NYA | NYA | NYA |
| Case 1 | Single side, 15 arms (56 pairs of sculls or 66 sweep oars {4 oars x 11 spaces}) | |||
| Case 2 | Single side, 12 arms (66 sweep oars or 44 pairs of sculls) | |||
| Case 3 | Double side, 30 arms (112 pairs of sculls or 132 sweep oars) | |||
| HORIZONTAL OAR RACKS (galvanized steel) | Case 1 | Case 2 | |
|---|---|---|---|
| Hor-arm-s | single sided arm, 800mm without rubber top+ "bolt 4" | 14 | |
| Hor-arm-d | double sided arm, 1,800mm without rubber top+ "bolt 4" | 18 | |
| Hor-up200 | 2000mm tall upright+ "bolt 1" | 2 | |
| Hor-up250 | 2500mm tall upright+ "bolt 1" | 2 | |
| Hor-xstay140a | 1400mm cross stay for "Vor" and "Hor"(for base, 2 pieces needed)+ "bolt 2" | 2 | 2 |
| Hor-xstay140b | 1400mm cross stay & spacer for "Vor" and "Hor"(for upright, 1 piece needed)+ "bolt 4" | 1 | 1 |
| Hor-xstay200a | 2000mm cross stay for "Vor" and "Hor"(for base, 2 pieces needed)+ "bolt 2" | ||
| Hor-xstay200b | 2000mm cross stay & spacer for "Vor" and "Hor"(for base, 2 pieces needed)+ "bolt 4" | ||
| Hor-spacer | spacer for top cross stay (150 x 50 x 50mm) | ||
| Hor-base-s | 1100mm base for single side | 2 | |
| Hor-base-d | 1400mm base for double side | 2 | |
| Hor-wheel1 | 200mm diameter heavy duty "free" wheel (2 needed for each base)+ "bolt 5" | 4 | |
| Hor-wheel2 | 200mm diameter heavy duty "fixed" wheel (2 needed for each base)+ "bolt 5" | ||
| Hor-shim | 2mm shim for adjusting the "lie" of the base, when not used with wheels | NYA | NYA |
| Hor-rub1 | 700mm length of extruded rubber to fit "Hor arm-s" | 28 | |
| Hor-rub2 | 800mm length of extruded rubber to fit "Hor arm-d" (2 needed for each arm) | ||
| Hor-glue | glue to fix rubber to arms (be be sourced locally, not by Swift) | n/a | n/a |
| Case 1 | Single side, 2m tall, 7 pairs of arms, with rubber tops, with wheels, | ||
| Case 2 | Double side, 2.5m tall, 9 pairs of arms, without rubber tops, without wheels, | ||
| ADJUSTABLE BOAT RACKS | Case 1 | Case 2 | Case 3 | |
|---|---|---|---|---|
| Mbr-arm1b | 730mm sliding arm with rubber top (square pipe to simply fit around "arm1a" (design not yet decided) | |||
| Mbr-up200 | 2000mm tall upright for single or double side + "bolt 1" | 2 | ||
| Mbr-up250 | 2500mm tall upright for single or double side + "bolt 1" | 3 | ||
| Mbr-up300 | 3000mm tall upright for single or double side + "bolt 1" | |||
| Mbr-up350 | 3500mm tall upright for single or double side + "bolt 1" | 4 | ||
| Mbr-xstay280 | 2800mm cross stay for 1s/2s + "bolt 2" | 3 | 6 | |
| Mbr-xstay420 | 4200mm cross stay for 4s + "bolt 2" | 4 | ||
| Mbr-xstay560 | 5600mm cross stay for 4s + "bolt 2" | |||
| Mbr-base-s | 1300mm base for single side | 2 | 3 | |
| Mbr-base-d | 1700mm base for double side | 2 | ||
| Mbr-con | 620mm connector (need same qty as "Mbr base-d") + 2 of "bolt 1" | 2 | ||
| Mbr-wheel1 | 200mm diameter heavy duty "free" wheel
(2 needed for each base) + "bolt 5" |
4 | ||
| Mbr-wheel2 | 200mm diameter heavy duty "fixed" wheel
(2 needed for each base) + "bolt 5" |
|||
| Mbr-shim | 2mm shim for adjusting the "lie" of the base, when not used with wheels | |||
| Mbr-arm2a | 800mm arm with reinforcing gusset, without rubber top + "bolt 1" | 12 | ||
| Mbr-arm2b | 780mm sliding arm with rubber top (with complete 700mm slide) to fit "arm2a" | 12 | ||
| Mbr-arm3a | 1,000mm arm with reinforcing gusset, without rubber top + "bolt 1" | |||
| Mbr-arm3b | 980mm sliding arm with rubber top (with complete 700mm slide) to fit "arm3a" | |||
| Mbr-rub1 | 700mm length of extruded rubber to fit "Mbr arm1a" when used without a sliding arm | |||
| Mbr-rub2 | 800mm length of extruded rubber to fit "Mbr arm2a" when used without a sliding arm | |||
| Mbr-rub3 | 1,000mm length of extruded rubber to fit "Mbr arm3a" when used without a sliding arm | |||
| Mbr-glue | glue to fix rubber to arms (to be sourced locally, not by Swift) | |||
| Mbr-rail | 700mm slide rail | |||
| Case 1 | Single side, 2m tall for 1s/2s, 4 boats, 2.8m span, with wheels, without sliding arms | |||
| Case 2 | Double side, 3.5m tall for 4s, 12 boats, 4.2m span, no wheels, without sliding arms | |||
| Case 3 | Single side, 2.5m tall for 4s, 4 boats, 2.8mspan x 2, no wheels, 780mm sliding arms | |||